MIG 145E
MIG Welding Machine / Inverter Welder
- Equipped with RILAND’s self-developed RICHI chip and use the advanced IGBT inverter technology;
- High performance in GASLESS modes, available to 1kg flux-cored self-shield wire, actually welding without gas;
- Digital display and with MMA function;
- Automatic identification of wire diameter, easy to adapt to 0.8 and 0.9mm wire welding;
- Expert parameters built-in, synergic control the voltage and current for easy and better welding;
- Stable welding performance on small current around 40A, enhancing the capacity to weld thinner metal, even 0.8mm sheet;
- Wire inching function acts as you press the trigger about 3s under no load;
- Fan as needed, reduce noise and dust inside the machine;
- Compact and portable (6kg) with handle, and reserved shoulder strap mounting holes;
- Intelligent protection: over-current, over-voltage, over heating protection;
| Item | ||||
| Power supply (V) | 1 phases 120V±15% | 1 phases 230V±15% | ||
| Frequency (Hz) | 50/60 | 50/60 | ||
| Welding process | MIG(FCAW) | MMA | MIG(FCAW) | MMA |
| Rated input current (A) | 25.1 (Ieff=13.8) | 27.2 (Ieff=12.2) | 13.1 (Ieff=7.2) | 14.2 (Ieff=7.8) |
| Welding current range (A) | 30-125 | 40-100 | 30-125 | 40-100 |
| Output voltage range (V) | 15.5-19 | 20.8-23.2 | 15.5-19 | 20.8-23.2 |
| No-load voltage (V) | 56 | 56 | ||
| Duty cycle,40℃ | 90A/30% | 80A/20% | 90A/30% | 80A/20% |
| Power factor | ≥0.71 | ≥0.71 | ||
| Efficiency (%) | ≥80% | ≥80% | ||
| Type of wire feeder | Internal | / | Internal | / |
| Welding-wire diameter (mm) | 0.8/0.9(flux-cored wire) | 1.6/2.0/2.4/(3.2) | 0.8/0.9(flux-cored wire) | 1.6/2.0/2.4/(3.2) |
| Insulation class | F | F | ||
| Protection grade | IP21 | IP21 | ||
| Weight without wire roller (kg) | 6 | 6 | ||
| Dimension (L×W×H) (mm) | 330×168×257 | 330×168×257 | ||
Steel brush hammer
Earth clamp
0.8mm flux-cored wire, 0.5kg
Fixed MIG torch with cable
Handheld welding mask
Shoulder strap
1 set electrode holder
Get in Touch
RILAND started its business in 2003 with the goal to design, manufacture and supply inverter welding and cutting equipment, including inverter MMA welders, inverter TIG welders, inverter MIG welders, air inverter plasma cutters, robotic welding systems, automatic welding carriages, digital intelligent welding systems, welding & cutting accessories and welding safety equipment. At RILAND, we do not consider ourselves as only a welding equipment manufacturer, but also position ourselves as an innovative technological force. With many years of development in the welding industry, RILAND currently has 10 holding subsidiaries, and strive to continue to progress steadily towards the next growth target of becoming international first-class comprehensive enterprise of welding equipment.
Read MoreRelated Products
-
- MIG 165SYN
MIG/MMA Welder
IGBT inverter, equipped with exclusive chip-RICHIP, drives powerful welding performance;
3 in 1 multi-process: gas MIG, gasless MIG, and MMA, compact and portable;
-
- MIG 185SYN & MIG 205SYN
MIG/TIG/MMA Welder
IGBT inverter, equipped with exclusive chip-RICHIP, drives powerful welding performance;
5 in 1 multi-process: gas MIG, gas-less MIG, spool-gun MIG, MMA & Lift-TIG;
-
- MIG 175SYN
MIG/TIG/MMA Welder
IGBT inverter, equipped with exclusive chip-RICHIP, drives powerful welding performance;
5 in 1 multi-process: gas MIG, gas-less MIG, spool-gun MIG, MMA & Lift- TIG;
-
- MIG 160GDM & MIG 180GDM
MIG/TIG/MMA Welder
Digital IGBT inverter technology;
Multiple processes: MIG-mixed gas, MIG-CO2 gas, MMA and Lift TIG;
