CUT 165I
Air Plasma Cutter / Inverter Plasma Cutting Machine
- IGBT inverter technology, fast dynamic response and reliable cutting performance;
- Advanced circuit design, success rate of arc starting as high as 99%, high arc stability;
- Configured with CNC interface, gouging capability, 2T/4T, air pressure switch, and post-flow control;
- Perfect for quality cutting metal sheets and plates with thickness of 30mm or below, and also suitable for piercing and beveling;
- Fast cutting speed and low energy consumption, featuring high cost effectiveness when cutting thick metal plates;
- Unique design of tri-proof air channel improves duty cycle, applicable to industrial cutting operations;
| Model | |
| Input voltage (V) | 3P/ AC380V±15% |
| Frequency (Hz) | 50/60 |
| Rated input current (A) | 49 |
| No-load voltage (V) | 370 |
| Duty cycle (40℃) | 60% |
| Output current adjusting range (A) | Cutting: 40-160 Gouging: 50-160 |
| Rated output voltage (V) | Cutting: 144 Gouging: 164 |
| Efficiency (%) | 89 |
| Power factor | 0.9 |
| Insulation class | Class F |
| Protection grade | IP21 |
| Arc starting | High frequency arc ignition |
| Pressure of air compressor (kgf/cm2) | 4-5.5 |
| Net weight (kg) | 51 |
| Dimensions (L×W×H) (mm) | 670×320×640 |
P80 plasma cutting torch, 1pc
Ground clamp & cable assembly, 1 set
Air filter regulator, 1pc
Gas hose, 1pc
CNC connector, 2pcs
- RILAND CUT 100I/125I/165I plasma cutting machines can tackle mains voltage fluctuation of ±15% (323V-437V), providing stable output cutting current and reliable arc (success rate of arc starting as high as 99%).
- Approved by RILAND's lab, these plasma cutters are compatible with 40m cutting torch (P80, cable size 14mm2).
- Metal: carbon steel plate of 16mm in thickness
- Current: 100A
- Cutting speed: 600mm/min
- Air pressure: 6kg
- Mains voltage: 380V
- Cutting effect: narrow kerf, smooth cut edge with almost no dross and slag-adherence, outstanding cutting quality
- Metal: carbon steel plate of 25mm in thickness
- Current: 120A
- Cutting speed: 300mm/min
- Air pressure: 6kg
- Mains voltage: 380V
- Cutting effect: smooth and clean cut edge, good deformation control of workpiece, ability to cut through thick metal plates
- 12mm-thick carbon steel plate
- Current: 100A
- Cutting speed: 500mm/min
- Air pressure: 5.5kg
Auto-darkening helmet
Welding gloves
Cutting torch shield cup
Plasma nozzle
Gouging nozzle
Plasma electrode
Get in Touch
RILAND started its business in 2003 with the goal to design, manufacture and supply inverter welding and cutting equipment, including inverter MMA welders, inverter TIG welders, inverter MIG welders, air inverter plasma cutters, robotic welding systems, automatic welding carriages, digital intelligent welding systems, welding & cutting accessories and welding safety equipment. At RILAND, we do not consider ourselves as only a welding equipment manufacturer, but also position ourselves as an innovative technological force. With many years of development in the welding industry, RILAND currently has 10 holding subsidiaries, and strive to continue to progress steadily towards the next growth target of becoming international first-class comprehensive enterprise of welding equipment.
Read MoreRelated Products
-
- CUT 100N
Plasma Cutter
Can be used with either external or internal air source, the constant output pressure of internal air compressor is 0.45MPa;
-
- CT 416
3-in-1 Multi-Function Plasma Cutter
TIG welding: 180A, good weld seam formation and stable current;
-
- CUT 40CT
Plasma Cutter
Reliable cutting performance, contact arc starting, high success rate of arc ignition;
-
- CUT 60CT
Plasma Cutter
Fast cutting speed, suitable for cutting carbon steel plate of 10mm at high speed;
