MIG 135E
MIG Welding Machine / Inverter Welder
- Equipped with RILAND’s self-developed RICHI chip and use the advanced IGBT inverter technology;
- Available to 1kg flux-cored self-shield wire, actually welding without gas;
- Synergy, greatly reduce difficulties to adjustment, especially for new welding operator;
- Stable welding performance on small current around 20A, enhancing the capacity to weld thinner metal;
- Lower spatter than that of general flux-cored welding machine;
- Wire inching function act as you press the trigger about 3s under no load;
- Fan as needed, reduce noise and dust inside the machine;
- Intelligent protection: over-current, over-voltage, over heating protection;
| Model | | |
| Power supply (V) | 1 phases 120V±15% | 1 phases 230V±15% |
| Frequency (Hz) | 50/60 | 50/60 |
| No-load voltage (V) | 55 | 58 |
| Rated input current (A) | 21.4 | 13.4 |
| Output current range (A) | 45 - 90 | 45-90 |
| Output voltage range (V) | 16.3 - 18.5 | 16.3 - 18.5 |
| Duty cycle | 20% @90A | 20% @ 90A |
| Power factor | >0.7 | >0.7 |
| Efficiency (%) | ≥80 | ≥80 |
| Type of wire feeder | Internal | Internal |
| Welding wire diameter (mm) | 0.8 | 0.8 |
| Insulation class | Class F | Class F |
| Protection grade | IP21S | IP21S |
| Weight without wire drive roll (kg) | 5.4 | 5.4 |
| Dimensions (L×W×H) (mm) | 318×135×240 | 318×135×240 |
MIG welding torch
Ground clamp & cable assembly
Power cord
2m shoulder strap
E71T-GS self-shielded flux-cored wire (Ø0.8mm)
Steel welding wire brush
Welding safety goggles
Hand-held welding shield
Welding gloves
E71T-GS self-shielded flux-cored wire (Ø0.8mm)
Wire feed drive roll
Get in Touch
RILAND started its business in 2003 with the goal to design, manufacture and supply inverter welding and cutting equipment, including inverter MMA welders, inverter TIG welders, inverter MIG welders, air inverter plasma cutters, robotic welding systems, automatic welding carriages, digital intelligent welding systems, welding & cutting accessories and welding safety equipment. At RILAND, we do not consider ourselves as only a welding equipment manufacturer, but also position ourselves as an innovative technological force. With many years of development in the welding industry, RILAND currently has 10 holding subsidiaries, and strive to continue to progress steadily towards the next growth target of becoming international first-class comprehensive enterprise of welding equipment.
Read MoreRelated Products
-
- MIG 145E
MIG Welder
Equipped with RILAND’s self-developed RICHI chip and use the advanced IGBT inverter technology;
High performance in GASLESS modes, available to 1kg flux-cored self-shield wire, actually welding without gas;
-
- MIG 165SYN
MIG/MMA Welder
IGBT inverter, equipped with exclusive chip-RICHIP, drives powerful welding performance;
3 in 1 multi-process: gas MIG, gasless MIG, and MMA, compact and portable;
-
- MIG 185SYN & MIG 205SYN
MIG/TIG/MMA Welder
IGBT inverter, equipped with exclusive chip-RICHIP, drives powerful welding performance;
5 in 1 multi-process: gas MIG, gas-less MIG, spool-gun MIG, MMA & Lift-TIG;
-
- MIG 175SYN
MIG/TIG/MMA Welder
IGBT inverter, equipped with exclusive chip-RICHIP, drives powerful welding performance;
5 in 1 multi-process: gas MIG, gas-less MIG, spool-gun MIG, MMA & Lift- TIG;
