MIG 251GE
MIG/MMA Welder / Inverter Welding Machine
- Equipped with RILAND’s self-developed RICHI chip and use the advanced IGBT inverter technology;
- Available to 5kg flux-cored self-shield wire, actually welding without gas and add hand welding function;
- Synergy, greatly reduce difficult to adjustment, especially for new welding operator;
- Stable welding performance on small current around 40A, enhancing the capacity to weld thinner metal and 0.8mm sheet, spot welded without perforation;
- Lower spatter than that of general flux-cored welding machine;
- Wire inching function act as you press the trigger about 3s under no load;
- Fan as needed, reduce noise and dust inside the machine;
- Intelligent protection: over-current, over-voltage, over heating protection;
| Model | |
| Power supply(V) | 1 phases 230V±15% |
| Frequency(Hz) | 50/60 |
| No-load voltage(V) | 61 |
| Rated input current(A) | 27 (MIG) |
| 27.2 (MMA) | |
| Output current range (A) | 50 - 160 (MIG) |
| 40 - 140 (MMA) | |
| Output voltage range (V) | 16.5 - 22 (MIG) |
| 21.6 - 25.6 (MMA) | |
| Duty cycle | 20% |
| Power factor | ≥0.65 |
| Efficiency (%) | ≥80% |
| Type of the wire feeder | Internal |
| Welding-wire diameter (mm) | 0.8/1.0 |
| Insulation class | F |
| Protection grade | IP21 |
| Weight without wire roller (kg) | 6 |
| Dimension(L*W*H mm) | 418*178*270 |
MIG welding torch, 1pc
Welding cable quick connector, 2pcs
Ground clamp & cable assembly, 1 set
Allen key, 1pc
Ground clamp & cable assembly
E71T-GS self-shielded flux-cored wire (Ø0.8mm)
ER50-6 MIG solid welding wire
Electrode holder & cable assembly
Welding chipping hammer
Welding gloves
Welding safety goggles
Hand-held welding shield
Get in Touch
RILAND started its business in 2003 with the goal to design, manufacture and supply inverter welding and cutting equipment, including inverter MMA welders, inverter TIG welders, inverter MIG welders, air inverter plasma cutters, robotic welding systems, automatic welding carriages, digital intelligent welding systems, welding & cutting accessories and welding safety equipment. At RILAND, we do not consider ourselves as only a welding equipment manufacturer, but also position ourselves as an innovative technological force. With many years of development in the welding industry, RILAND currently has 10 holding subsidiaries, and strive to continue to progress steadily towards the next growth target of becoming international first-class comprehensive enterprise of welding equipment.
Read MoreRelated Products
-
- MIG 300GN
MIG/MMA Welder
Advanced IGBT inverter technology;
Dual welding processes: MIG and MMA;
-
- MultiPro 200SP
MIG/TIG/SMAW Welder
Multiple welding processes: MIG, Pulse MIG, SMAW (MMA or stick) and Lift TIG;
-
- MIG 135E (120V/230V)
MIG Welder
Equipped with RILAND’s self-developed RICHI chip and use the advanced IGBT inverter technology;
Available to 1kg flux-cored self-shield wire, actually welding without gas;
-
- MIG 145E
MIG Welder
Equipped with RILAND’s self-developed RICHI chip and use the advanced IGBT inverter technology;
High performance in GASLESS modes, available to 1kg flux-cored self-shield wire, actually welding without gas;
